410S Stainless Steel Coil
Beskriuwing
Spesifikaasjes:
1. Standert: ASTM A240, JIS G4304, EN10088
2. Grade: 200series&300searjes&400searjes
3. Dikte: 0,03mm - 6,0mm
4. Breedte: 8mm-600mm
5. Lengte: as fersyk fan klanten
6. Oerflak: 2D,2B, BA, Mirror finished, N04, Hair Line, Matt finish, 6K, 8K
7.Technology: kâld lutsen / kâld rôle / waarm rôle
Materialen:
| Type | Klasse | Klasse | Gemyske komponint % | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Oar | |||
| Austenitysk | 201 | SUS201 | ≤0,15 | 16.00-18.00 | 3,50-5,50 | 5.50–7.50 | ≤0,060 | ≤0,030 | - | ≤1.00 | - | ≤0,25 | - |
| 202 | SUS202 | ≤0,15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | ≤0,060 | ≤0,030 | ≤1.00 | - | ≤0,25 | - | ||
| 301 | 1.4310 | ≤0,15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | ≤0.10 | - | |
| 304 | 1.4301 | ≤0,07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 304L | 1.4307 | ≤0,030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 304H | 1.4948 | 0,04-0,10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 309 | 1.4828 | ≤0,20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 309S | * | ≤0,08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 310 | 1.4842 | ≤0,25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - | |
| 310S | * | ≤0,08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - | |
| 314 | 1.4841 | ≤0,25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | 1.50-3.00 | - | - | - | |
| 316 | 1.4401 | ≤0,08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0,045 | ≤0,030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316L | 1.4404 | ≤0,030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0,045 | ≤0,030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316Ti | 1.4571 | ≤0,08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0,045 | ≤0,030 | 2.00-3.00 | ≤1.00 | - | 0.1 | Ti5(C+N)~0,70 | |
| 317 | * | ≤0,08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 317L | 1.4438 | ≤0,03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 321 | 1.4541 | ≤0,08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0,70 | |
| 321H | * | 0,04-0,10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0,70 | |
| 347 | 1.4550 | ≤0,08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1,10 | |
| 347H | 1.494 | 0,04-0,10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1,10 | |
| Duplex | 2205 | S32205 | ≤0,03 | 22.0-23.0 | 4,5-6,5 | ≤2.00 | ≤0,030 | ≤0.020 | 3.0-3.5 | ≤1.00 | - | 0,14-0,20 | |
| 2507 | S32750 | ≤0,03 | 24.0-26.0 | 6,0-8,0 | ≤1.20 | ≤0,035 | ≤0.020 | 3,0-5,0 | ≤0,80 | 0.5 | 0,24-0,32 | ||
| Ferrite | 409 | S40900 | ≤0,03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0,040 | ≤0.020 | - | ≤1.00 | - | ≤0,030 | Ti6(C+N)~0.50 Nb:0.17 |
| 430 | 1 kr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0,040 | ≤0,030 | - | ≤1.0 | - | - | - | |
| 444 | S44400 | ≤0,025 | 17.50-19.50 | 1 | ≤1.00 | ≤0,040 | ≤0,030 | 1,75-2,5 | ≤1.00 | - | 0.035 | Ti+Nb: 0,2+4(C+N)~0,80 | |
| Martensite | 410 | 1 kr13 | 0,08-0,15 | 11.50-13.50 | 0,75 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 410S | * | ≤0,080 | 11.50-13.50 | 0.6 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 420 | 2 kr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 420J2 | 3 kr13 | 0,26-0,35 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - | |
| PH | 630 | 17-4PH | ≤0,07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0,15-0,45 |
| 631 | 17-7PH | ≤0,09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | ≤0,50 | - | Al 0,75-1,50 | |
| 632 | 15-5PH | ≤0,09 | 14.00-16.00 | 3,50-5,50 | ≤1.00 | ≤0,040 | ≤0,030 | 2.00-3.00 | ≤1.00 | 2,5-4,5 | - | Al 0,75-1,50 | |
Basis ynformaasje
410s RVS Coil, mei goede corrosie ferset en machinability, it is in algemien doel stiel en cutting ark stiel.410S is in soarte fan stiel dat kin ferbetterje de corrosie ferset en formability fan 410 steel.410S is in hege sterkte stiel dat kin fierder ferbetterjen de corrosie ferset fan 410 stiel.It wurdt brûkt foar turbine blades en hege temperatuer dielen.
• Spesifikaasjes: AISI 410s, ASTM 410s
• Finishes: Ba oerflak, 2b oerflak, No.1 (wite hûd), 2D oerflak, No.4 (frosted), HL (wire drawing), 8K oerflak hawwe poerbêst oerflak kwaliteit
• Mill tolerances op dikte & flatness jildt. Rop JM Steel as jo nedich spesifike maten of nôt rjochting.
410S Karakteristike ferwurkjen technology
1D - It oerflak hat diskontinue korrelige foarm, ek bekend as mist oerflak.
Ferwurkjen technology: hyt rôljen + annealing skot peening beitsen + kâld rôljen + annealing beitsen.
2D - In bytsje sulveren wite kleur.
Ferwurkjen technology: hyt rôljen + annealing skot peening beitsen + kâld rôljen + annealing beitsen.
2B - Sulver wyt mei bettere glans en platheid dan in 2D oerflak.
Ferwurkjen technology: hyt rôljen + gloeien shot peening beitsen + kâld rôljen + annealing beitsen + quenching en tempering rolling.
Ba - Excellent oerflak glans, hege reflectivity, lykas in spegel oerflak.
Ferwurkjen technology: hyt rôljen + gloeien skot peening beitsen + kâld rôljen + annealing beitsen + oerflak polishing + quenching en tempering rolling.
No.3 - Goede glans, grof nôt oerflak.
Ferwurkjen technology: polearjen en tempering rolling foar 2D of 2B mei 100 ~ 120 abrasive materialen (JIS R6002).
No.4 - Goede glans, moaie linen op it oerflak.
Ferwurkingsproses: polearjen en temperearjen foar 2D of 2B mei 150 ~ 180 abrasive materialen (JIS R6002).
HL -- Sulvergriis mei hierstrepen.
Processing technology: 2D produkten of 2B produkten mei passende granularity fan abrasive materialen foar polishing it oerflak is in trochgeande abrasive nôt.
MIRRO - Spekulêr.
Processing technology: 2D produkten as 2B produkten mei passende granularity fan it slypjen materiaal slypjen en polearjen nei de spegel effekt.
