316L Stainless Steel Strip
Basis ynformaasje
316L Stainless Steel Strip Spesifikaasjes
Grade: 316L
Standert: ASTM/EN/JIS
Dikte: 0.03mm-3.0 mm
Breedte: 1.5mm-600 mm
Lengte: spoeltype of it kin wurde produsearre as klanteasken
Surface Finish: NO.1, 2B, 2H (Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, ensfh
Râne: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
316L Stainless Steel Strip Foardielen
Corrosie Resistance
De corrosie ferset fan 316L RVS strip is better as 304 RVS strip, en it hat goede corrosie ferset yn it produksjeproses fan pulp en papier yndustry.En 316L roestfrij stiel strip is ek resistint foar de eroazje fan 'e oseaan en korrosive yndustriële sfear.
Heat Resistance
Yn de intermitterende applikaasje ûnder 1600 graden, 316 RVS strip hat goede oksidaasjegebrûk ferset.
316L RVS strip hat bettere wjerstân tsjin carbid delslach as normale 316 grade RVS.
Beskriuwing
| Type | Klasse | Klasse | Gemyske komponint % | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Oar | |||
| Austenitysk | 201 | SUS201 | ≤0,15 | 16.00-18.00 | 3,50-5,50 | 5.50–7.50 | ≤0,060 | ≤0,030 | - | ≤1.00 | - | ≤0,25 | - |
| 202 | SUS202 | ≤0,15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | ≤0,060 | ≤0,030 | ≤1.00 | - | ≤0,25 | - | ||
| 301 | 1.431 | ≤0,15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | ≤0.10 | - | |
| 304 | 1.4301 | ≤0,07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 304L | 1.4307 | ≤0,030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 304H | 1.4948 | 0,04-0,10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 309 | 1.4828 | ≤0,20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 309S | * | ≤0,08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 310 | 1.4842 | ≤0,25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - | |
| 310S | * | ≤0,08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - | |
| 314 | 1.4841 | ≤0,25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | 1.50-3.00 | - | - | - | |
| 316 | 1.4401 | ≤0,08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0,045 | ≤0,030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316L | 1.4404 | ≤0,030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0,045 | ≤0,030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316Ti | 1.4571 | ≤0,08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0,045 | ≤0,030 | 2.00-3.00 | ≤1.00 | - | 0.1 | Ti5(C+N)~0,70 | |
| 317 | * | ≤0,08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 317L | 1.4438 | ≤0,03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 321 | 1.4541 | ≤0,08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0,70 | |
| 321H | * | 0,04-0,10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0,70 | |
| 347 | 1.455 | ≤0,08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1,10 | |
| 347H | 1.494 | 0,04-0,10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1,10 | |
| xm-19 | Nitronic50 | ≤0,06 | 20.50-23.50 | 11.50-13.50 | 4,0-6,0 | ≤0,045 | ≤0,030 | 1.50-3.00 | ≤1.00 | - | 0,2-0,4 | Nb: 0,10-0,30 V: 0,10-0,30 | |
| 904L | N08904 | ≤0,02 | 19.0-23.0 | 23.0-28.0 | 4,0-5,0 | ≤0,045 | ≤0,035 | ≤1.00 | 0.1 | Cu: 1,0-2,0 | |||
| Duplex | 2205 | S32205 | ≤0,03 | 22.0-23.0 | 4,5-6,5 | ≤2.00 | ≤0,030 | ≤0.020 | 3.0-3.5 | ≤1.00 | - | 0,14-0,20 | |
| 2507 | S32750 | ≤0,03 | 24.0-26.0 | 6,0-8,0 | ≤1.20 | ≤0,035 | ≤0.020 | 3,0-5,0 | ≤0,80 | 0.5 | 0,24-0,32 | ||
| * | S32760 | ≤0,03 | 24.0-26.0 | 6,0-8,0 | ≤1.00 | ≤0,030 | ≤0,010 | 3.0-4.0 | ≤1.00 | 0,5-1,00 | 0,2-0,3 | ||
| 2304 | S32304 | ≤0,03 | 21.5-24.5 | 3,0-5,5 | ≤2,50 | ≤0,040 | ≤0,030 | 0,05-0,6 | ≤1.00 | 0,05-0,6 | 0,05-0,2 | ||
| 329 | 1.446 | ≤0,08 | 23.00-28.00 | 2.00-5.00 | ≤1.00 | ≤0,040 | ≤0,030 | 1.00-2.00 | ≤0,75 | - | - | ||
| Ferrite | 409 | S40900 | ≤0,03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0,040 | ≤0.020 | - | ≤1.00 | - | ≤0,030 | Ti6(C+N)~0.50 Nb:0.17 |
| 430 | 1 kr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0,040 | ≤0,030 | - | ≤1.0 | - | - | - | |
| 444 | S44400 | ≤0,025 | 17.50-19.50 | 1 | ≤1.00 | ≤0,040 | ≤0,030 | 1,75-2,5 | ≤1.00 | - | 0.035 | Ti+Nb: 0,2+4(C+N)~0,80 | |
| 446 | S44600 | ≤0,20 | 23.00-27.00 | 0,75 | ≤1.5 | ≤0,040 | ≤0,030 | 1.50-2.50 | ≤1.00 | - | ≤0,25 | - | |
| Martensite | 410 | 1 kr13 | 0,08-0,15 | 11.50-13.50 | 0,75 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 410S | * | ≤0,080 | 11.50-13.50 | 0.6 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 416 | Y1Cr13 | ≤0,15 | 12.00-14.00 | 3) | ≤1.25 | ≤0,060 | ≥0.15 | - | ≤1.00 | - | - | - | |
| 420 | 2 kr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 420J2 | 3 kr13 | 0,26-0,35 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - | |
| 431 | 1Cr17Ni2 | ≤0,20 | 15.00-17.00 | 1.50-2.50 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤0,80 | - | - | - | |
| 440C | 11 kr17 | 0,95-1,20 | 16.00-18.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | 0,75 | ≤1.00 | - | - | - | |
| PH | 630 | 17-4PH | ≤0,07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0,15-0,45 |
| 631 | 17-7PH | ≤0,09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | ≤0,50 | - | Al 0,75-1,50 | |
| 632 | 15-5PH | ≤0,09 | 14.00-16.00 | 3,50-5,50 | ≤1.00 | ≤0,040 | ≤0,030 | 2.00-3.00 | ≤1.00 | 2,5-4,5 | - | Al 0,75-1,50 | |
Stainless Steel Sheet Plate Grade Baogu Supply
| Oerflakte ôfwurking | Skaaimerken en tapassing |
| 2B | De oerflakhelderheid en platheid fan no 2B is better dan no2D.dan troch in spesjale oerflak behanneling te ferbetterjen syn meganyske al eigenskippen, No2B koe hast foldwaan wiidweidich gebrûk. |
| No.1 | Gepolijst mei abrasive riem fan grit #100-#200, hawwe bettere helderheid mei diskontinue grouwe stria, brûkt as ynderlike en eksterne ornaments foar gebou, elektryske apparaten en keukengerei ensfh. |
| No.4 | Polished mei abrasive riem fan grit #150-#180, hawwe bettere helderheid mei diskontinue grof stria, mar tinner dan No3, wurde brûkt as badkuip gebouwen ynderlike en eksterne ornaments elektryske apparaten keukengerei en iten ferwurkjen apparatuer ensfh. |
| HL | Polished mei abrasive riem fan grit # 150- # 320 op de NO.4 finish en hat trochgeande strepen, benammen brûkt as gebouwen ornaments liften, doar fan gebou, frontal plaat etc. |
| BA | Kâld rôle, helder annealed en hûd-trochjûn, it produkt hat poerbêst helderheid en goede reflexiviteit lykas spegel, keuken apparaat, ornament etc. |
| 8K | It produkt hat poerbêste helderheid en leaver reflexiviteit kin de spegel wêze. |
